Introdução
The internal structure of the YRO AC/DC combiner box is divided into a DC zone and an AC zone, separated by an insulating partition in the middle, ensuring that the two parts do not interfere with each other and are safe to use.
The DC side can generally be equipped with a circuit breaker and a surge protective device, and can also be replaced with a fuse according to requirements. In addition, an anti-reverse diode can be installed to prevent current from flowing backwards. As long as your usage requirements are met, all these configurations can be provided.
The configuration of the AC side is similar to that of the DC side, and it also supports the installation of corresponding protection and control components.
Características
- High integration
The YRO combines DC and AC power distribution in one unit. This eliminates the need to purchase two separate boxes, as well as the need to drill two rows of installation holes on the wall, lay two sets of cables, and install protective equipment. For projects with limited roof space or small distribution room areas, this single box can free up a lot of space. It saves money and saves space.
- Balances both AC and DC application needs
Ordinary distribution boxes are more suitable for a single usage environment. In contrast, the YRO AC/DC distribution box is better suited for scenarios involving both AC and DC equipment, reducing the need for back-and-forth switching or repetitive combinations of devices.
Detalhes
The bottom of the enclosure reserves relatively ample positions for cable entry and exit holes, and is also equipped with complete sealing joints, so no extra time is needed during installation to search for compatible accessories, making the wiring process smoother. For some scenarios where equipment may be added or lines may be adjusted later, it can also leave a certain margin, making it less likely to need to replace the equipment due to insufficient interfaces. Compared to a one-time fixed design, this reserved approach is more suitable for actual usage needs. Whether it is a new energy system or an electrical application environment, it will be more relaxed when adding several circuits later, reducing the trouble caused by repeated modifications.
Parâmetros
| Série de produtos | YRABS-6/1 DC 600V |
| Nível de proteção | IP65 |
| Tensão máxima de operação | 600 V |
| Fusível padrão | 15A 1000V |
| Disjuntor | 2P 63A 600V |
| Protetor contra surtos | 2P 40kA 600V |
| Conector Solar | 30A 1000V |
